Product detailed description
Pipe filter for removing mechanical impurities from water ranging from 1 to 25 microns (sand, clay, silt, rust, hair, and other insoluble particles). Mechanical filters are used for pre-filtration of water and are usually installed as the first stage of the filtration system.
The filter tube includes a filter cartridge made of 100% polypropylene, with a porosity of 75 + 25 microns, providing high resistance to bacteria and viruses. This mechanical cartridge can be replaced with another filter cartridge or refillable filter cartridge with various filter media. When choosing a replacement cartridge, it is essential to select the correct size of 20”.
The package also includes a holder, screws, a tightening key, and the corresponding cartridge.
Technical parameters:
The product is certified and intended for contact with drinking water.
Max. flow rate | 3 m3/hour |
---|---|
Length of cartridge | 20" |
Wall holder | Yes, metal - included in the package |
Head | PP without brass fittings |
Filter key | Yes, plastic - included in the package |
Filter housing | Transparent - SAN |
Max. operating temperature | 50 °C |
Max. operating pressure | 8 bar |
Mechanical cartridge | DGD 7525, 20" AB (part of the filter tube) |
O-ring | NBR 70 Sh A |
Burst pressure | 25 bar |
Connection | 1" |
Additional parameters
According to the type of filter: | For mechanical impurities |
---|
Be the first who will post an article to this item!