Filter for hard water and nitrates OP COMBI

Code: 5807 AQC0001117 AQC0001141 AQC0001175 AQC0001429 AQC0001468 AQC0001633 Choose variant
Not rated
€2 959,20 €1 839,60 €891,60 €1 055,60 €1 691,60 €1 147,60 €2 531,60 from €891,60 €2 445,62 excl. VAT €1 520,33 excl. VAT €736,86 excl. VAT €872,40 excl. VAT €1 398,02 excl. VAT €948,43 excl. VAT €2 092,23 excl. VAT from €736,86 excl. VAT
In stock; available within 1–3 days In stock; available within 1–3 days In stock In stock In stock; available within 1–3 days In stock; available within 1–3 days In stock; available within 1–3 days Choose variant
Title
Chosen variant is not available. Reset selected parameters.
Programming the control head

Multifunctional filter for removing water hardness and nitrates. Water hardness can be adjusted as needed. 3-year warranty.

Detailed information

Product detailed description

Multifunctional filter for reducing water hardness and nitrates with a maximum flow rate of 1.8 m3/h to 5.0 m3/h, with maximum hardness up to 8 mmol/l and maximum nitrate concentration up to 200 mg/l. The device is intended for central water treatment in family houses, cottages, and smaller guesthouses. The OP COMBI device uses filtering materials RESINEX KW-8 for hardness and RESINEX NR-1 for nitrates. The maximum operating pressure of the device is 8 bar. Thanks to the multifunctional filter OP COMBI, you will no longer have to deal with issues caused by hard water and nitrates in your water.

The product is certified and suitable for contact with drinking water.  

Extended warranty of 3 years.

made in europe

By removing hard water and nitrates, you will gain:

  • ideally soft drinking water without limescale and nitrates
  • pleasant showering without dry skin and eczema
  • beautiful silky hair
  • clean shower corner
  • no white spots in the bathroom or kitchen
  • lower heating costs
  • longer lifespan of household appliances
  • lower costs for cleaning products
  • softer laundry

CHARACTERISTICS:

  • filtering material: Ion exchange for softening + Ion exchange for nitrates
  • control head: PENTAIR Autotrol LOGIX 255/760 (39, 50 and 63), PENTAIR Autotrol LOGIX 278/762 (82, 100, 150 and 200)
  • head control: Volumetric (capacity) or timed
  • lower support: gravel 2–3mm
  • ion exchange tank: Fiberglass
  • salt tank: Separate, hardened PE
  • maximum operating pressure: 8 bar
  • input and output connections: Brass 1", external thread
  • waste connection: Plastic 1/2"
  • operating temperatures: 2–38°C
  • external flange with main by-pass: yes
  • built-in water meter: yes
  • built-in flow meter: yes
  • max. flow: 1.8 m3/h to 5.0 m3/h
  • safety overflow: yes
  • electrical voltage: 220/12 V AC
  • maximum hardness: 8 mmol/l
  • maximum nitrate concentration: 200 mg/l

IMPORTANT INFORMATION:

  • A pre-filter for mechanical impurities must be installed before each combined filter.
  • It is necessary to have a connection for drainage near the filtration.
  • The minimum operating pressure must be 2.5 bar
  • The price does not include filter installation and travel costs.

 TECHNICAL PARAMETERS:

NAME CONNECTION CATEX FILLING AMOUNT ANEX FILLING AMOUNT SALT CONSUMPTION WATER CONSUMPTION NOMINAL FLOW at 0 mmol/l MAXIMAL FLOW INSTALLATION HEIGHT OF CONNECTIONS TOTAL HEIGHT
     (l) (l) (kg/1 reg.) (l/1 reg.) (m³/h *) (m³/h **) mm (mm)
OP COMBI 39 1“ 25 14 4.3 170 1.0 1.3 1434 1590
OP COMBI 50 1“ 30 20 5.5 220 1.3 1.6 1390 1550
OP COMBI 63 1“ 38 25 6.9 280 1.5 1.9 1434 1590
OP COMBI 82 1“ 50 32 9 330 2.0 2.5 1735 1920
OP COMBI 100 1“ 60 40 11 400 2.4 3 1730 1940
OP COMBI 150 1“ 90 60 16.5 590 3.6 4.5 1748 1940
OP COMBI 200 1“ 125 75 22 800 5.0 5.7 1805 1985

 

Transport of the filtration device

We recommend sending the device on a pallet to avoid damage during transportation. If you are also purchasing regeneration salt along with the filtration device, please add the pallet to your cart along with the salt.

Installation and service of the device

Installation and transport will be provided by our own service technicians (we have 14 authorized service technicians across the Czech Republic and Slovakia). If you are interested, we will be happy to prepare a price quote for you. The installation price depends on the complexity and used materials (connection hoses, valves, etc.). If you are interested in installation, please inform us in the note in your cart ("Add note for seller").

Service replacements are recommended to be performed regularly once a year. The price of a service replacement is 1,990 CZK + travel costs, which are charged flat at 590 CZK (for Prague and Brno 990 CZK) when the technician's trip is combined with additional installations or services along the way. 

Additional parameters

Category: Hard water filters
According to the connection: On the water supply line
According to the type of filter: For hard water, On Nitrates
According to the variant of water treatment: Economic option
According to usage: For households
By type: Multifunctional
Product type for water treatment: Water Softeners, Nitrate filters

Be the first who will post an article to this item!

Do not fill out this field:

Security check