Impulse water meter EMEC
Code: 5533/2/30 AQC0001779 AQC0001789 AQC0001792 AQC0001793 AQC0001824 Choose variantRelated products
Product detailed description
Impulse dry-running water meters EMEC CATFI with threaded connection serve to measure water volume and to send pulses to the dosing pump for proportional dosing.
Water meters EMEC CATFI are ideal for applications requiring the dosing of chemicals or other substances into water based on flow. They are equipped with a standard dial like a regular water meter, and therefore can be used for traditional water consumption measurement. Thanks to the threaded connection, their installation into the piping system is very simple. These water meters are designed for cold water and are capable of withstanding temperatures up to 30 °C.
The packaging also includes brass fittings and a connecting cable.
- Water temperature: max. 30°C
- Dry contact: 4 pulses per 1 liter*
- Maximum pressure: 16 bar
- Maximum current: 1.0 A
- Maximum power: 10 VA
- Including connecting nuts: yes
- Connecting cable: 2m (RG58) with BNC connector
- Made in Italy
* On request: 1 imp/l, 2 imp/l, 1 imp/10l, 4 imp/10l, 1 imp/100l, 4 imp/100l, 1 imp/1000l
Variants differ by the size of the thread:
Connection/thread | Material | DN | Nominal flow | Max. flow | Min. flow | Length |
1/2" | Brass | 15 mm | 1.5 m3/h | 3 m3/h | 30 l/h | 110 mm |
3/4" | Brass | 20 mm | 2.5 m3/h | 5 m3/h | 50 l/h | 130 mm |
1" | Brass | 25 mm | 3.5 m3/h | 7 m3/h | 70 l/h | 160 mm |
1"1/4 | Brass | 30 mm | 5 m3/h | 10 m3/h | 100 l/h | 160 mm |
1"1/2 | Brass | 40 mm | 10 m3/h | 20 m3/h | 200 l/h | 200 mm |
2" | Cast iron with epoxy coating | 50 mm | 15 m3/h | 30 m3/h | 450 l/h | 300 mm |
Additional parameters
Category: | Accessories for water disinfection |
---|---|
By type: | Impulse water meters |
Type of accessory: | Impulse water meter |
Be the first who will post an article to this item!