Mechanical water filter CINTROPUR NW 400

Product detailed description

The medium industrial mechanical filters CINTROPUR NW 400 are designed for higher flow rates of filtered water. They are particularly suitable where there is a demand for higher water flow or where the water is heavily contaminated. The filter is equipped with a drain screw for easy maintenance.

The mechanical pipeline water filters CINTROPUR NW 400 remove mechanical impurities such as sand, clay, hair, and other insoluble particles up to 1 micron depending on the filter insert used. Mechanical filters are used for pre-filtering water and are installed as the first stage of the filtration system.

Advantages of using Cintropur filters

Cintropur is one of the most affordable operations on the market. Instead of a traditional filter insert, a so-called "sock" is used, which is slipped over the filter cylinder. The filter has a low pressure drop. The construction of the filters includes a so-called centrifuge, which creates a boiling effect in the filter bowl, significantly increasing the efficiency of filtration.

You should know

We recommend installing Cintropur filters at a sufficient height that allows for convenient maintenance and replacement of the filter insert. The space under the installed filter should be at least the same height as the filter itself. An illustrative video of the maintenance of the installed Cintropur filter can be found in the VIDEO tab.

Operating pressure: 10 bar
Max. operating pressure: 16 bar

The product is certified and intended for contact with drinking water.

Contents of the filter packaging:

• wrench
• filter insert (standard 25 microns)
• 2x plastic flanges
• 2x pressure gauges
• drain screw

This filter must be mounted on the wall. The wall mount is not included, it can be purchased separately at Aquashop-global.com

Cintropur filters are made in Belgium.

Available variants: