OPD 12 Slim Nitrate Removal Filter Volume

Code: AQC0001503
Not rated
€551,60 €455,87 excl. VAT
In stock; available within 5 days
Programming the control head

OPD 12 Slim Filter is used to remove nitrates from water throughout the entire building. The maximum flow rate reaches up to 1.1 m3/hour.

Detailed information

Product detailed description

OPD 12 Slim Filter is a fully automatic modern device that effectively removes nitrates from water in your home. It is designed to be connected to the main water inlet into the premises and for central filtration. It is an excellent choice in terms of price/effectiveness.

With its special slim design (only 24 cm wide), it is suitable for use in smaller premises (e.g., for a household occupied by a smaller family). The maximum flow rate reaches up to 1.1 m3/hour.

The series of nitrate removal filters OPD Slim comes in two variants: OPD 8 Slim (time or volume) and OPD 12 Slim (volume).

The variant with volume control can be optionally equipped with a mixing by-pass to set the hardness of the output water and a safety float.

The OPD Slim cabinet is made of sturdy polyethylene and is equipped with a safety overflow.

The OPD Slim filters are equipped with a reliable Autotrol valve with a camshaft system and control flaps.
Its 7-cycle regeneration ensures reduced leakage of hard water and optimal use of regeneration salt. Autotrol valves are among the best-selling automatic valves for domestic use in Europe. Due to their modular design, they are very versatile and suitable for various applications.

The product is certified and designed for contact with drinking water.

Extended warranty of 3 years.

made in europe
Models with control units Pentair Autotrol 368/606 with volume control are equipped with an integrated turbine, which counts the amount of water that has flowed through the device. The filtering medium is then regenerated based on the water flow (capacity regeneration).

Smart automatic regeneration Logix evaluates water consumption for the last 28 days and accordingly determines consumption on individual days of the week and sets regeneration based on the detected current consumption. It allows for easy programming with automatic capacity calculation.

TECHNICAL PARAMETERS:

OPD 12 Slim Filter –⁠ 368 –⁠ volume

  • Control valve: Autotrol 368/606
  • Head control: volume
  • Device programming: automatic, computer-controlled
  • Filtration medium: Anex ion-exchange resin
  • Amount of medium: 12 liters
  • Tank for ion exchange: fiberglass
  • Connection: 3/4"
  • Salt consumption: 1.44 kg per regeneration
  • Water consumption: approx. 32 - 55 liters per regeneration
  • Pressure tank: 8x24"
  • Width: 240 mm
  • Height: 700 mm
  • Depth: 450 mm without by-pass / 540 mm with by-pass 
  • Installation height of connections: 670 mm
  • Waste connector: 1/2", hose barb
  • Operating pressure: 1.38 - 8.61 bar
  • Operating temperatures: 2-38°C
  • Electrical voltage: 230V/50Hz
  • Power consumption: 5W
  • By-pass: on request
  • Recommended number of people: 2 - 3
  • *Nominal flow rate at 0 mmol/l: 0.7 m³/h
  • **Nominal flow rate at 0.5 - 1 mmol/l: 0.9 m³/h
  • ***Maximum flow rate > 1 mmol/l: 1.1 m³/h
  • Filter capacity for 1 °N (dH): 48 m³
  • Cabinet type casing
  • Very effectively removes nitrates

*) Nominal flow rate at 0 mmol/l – flow at zero hardness leakage in the output water (calculated at an input hardness of 3 mmol/l).
**) Nominal flow rate at 0.5 - 1 mmol/l - flow at hardness leakage in the output water in the range of 0.5 – 1 mmol/l (calculated at an input hardness of 3 mmol/l).
***) Maximum flow rate > 1 mmol/l - flow at hardness leakage in the output water slightly higher than 1 mmol/l (calculated at an input hardness of 3 mmol/l).

Transport of the filtration device

We recommend shipping the device on a pallet to prevent damage during transport. If you are purchasing regeneration salt along with the filtration device, you can add the pallet to your cart along with the salt.

Installation and service of the device

Installation and transport will be carried out by our own service technicians (we have 14 authorized service technicians throughout the Czech Republic and Slovakia). If interested, we will gladly provide you with a price quote. The installation price depends on the difficulty and materials used (connecting hoses, valves, etc.).

We recommend performing service exchanges regularly once a year. The price for a service exchange is 1,990 CZK + travel expenses, which is charged a flat rate of 590 CZK (for Prague and Brno 990 CZK) if the technician's trip is combined with other installations or service on the way. 

Additional parameters

Category: Nitrate filters
According to the connection: On the water supply line
According to the type of filter: On Nitrates
According to use: For households
Product type for water treatment: Nitrate filters

Be the first who will post an article to this item!

Do not fill out this field:

Security check