PUMP blue line PMC1004P.1 multi-stage submersible pump
Code: AQC0001644Product detailed description
Plastic multi-stage submersible pump with stainless steel casing and float switch PUMPA blue line PMC1004P.1. It is designed for pumping clean or slightly contaminated drainage water from basements and tanks, for irrigation or transferring reservoirs. It can pump water up to 50 mm from the bottom. For easier placement, it comes with a 10 m cable. The pump achieves a maximum head of up to 40 m.
Usage of the PUMPA blue line PMC1004P.1 Pump
- For pumping clean drainage water with a maximum particle size of up to 1 mm
- For irrigation or transferring reservoirs
Technical Parameters
Model | blue line PMC1004P.1 |
Maximum flow (m3/hour) | 6.5 |
Maximum head (m) | 40 |
Voltage/frequency (V/Hz) | 230/50 |
Nominal motor power (W) | 1000 |
Connection | 1" |
Maximum immersion depth (m) | 7 |
Maximum fluid temperature (°C) | 35 |
Cable length (m) | 10 |
Size/length of pump (mm) | diameter 140, height 435 |
Certified for drinking water | no |
Float | yes |
Automatic thermal protection | yes |
Dry run protection | no |
Built-in switch | no |
Speed control | no |
Capacitor | integrated |
Maximum outer diameter (mm) | 140 |
Impeller material | Noryl |
Design | centrifugal |
Check valve | no |
Additional parameters
Category: | Submersible pumps |
---|---|
According to usage: | Submersible pumps |
Be the first who will post an article to this item!
Add a comment