PX ECO filter tube with brass head and sludge valve

Code: AQC0001827 5869/3 Choose variant
Not rated
€187,60 €155,04 excl. VAT
In stock In stock; available within 7 days Choose variant
Connection
Chosen variant is not available. Reset selected parameters.

Empty filter tube PX ECO with brass head, union nut, sludge valve. Suitable for hot water treatment (up to 60 °C) under high pressure (up to 10 bar)Size 9“¾. Connection ¾“ or 1“. 

Detailed information

Product detailed description

Transparent filter tube PX ECO with a brass head, screw nut, and sludge valve is designed for effective water filtration in households as well as technical and industrial applicationsIt withstands even extreme conditions and in combination with a filter cartridge, the filter is suitable for hot water treatment (up to 60 °C) at high pressure (up to 10 bar).

The design of this model consists of three main parts (head-nut-tube), which ensures easy assembly and reliable operation. The filter head is made of natural brass and the tube is made of PET-G, ensuring long life and reliability. It is equipped with two air vent valves.

The unique feature of this model is the drain sludge valve, which allows for quick and complete removal of accumulated sediments. The teardrop-shaped tube effectively drains all impurities, while the grid at the bottom creates a collection reservoir that protects the filter cartridge from contamination by floating particles.

In combination with the filter cartridge, it forms a simple filter that removes all mechanical impurities from the incoming water. This filtration is ideal as a pre-filter for further filtration or to protect equipment that requires clean water without mechanical impurities such as sand, clay, silt, hair, and other insoluble particles. It provides greater comfort and assurance when using water for any purpose.

The package contains only the empty filter tube. The filter cartridge is not included!

Key features:

  • Water treatment at high pressure up to 10 bar
  • Sludge valve for quick and complete removal of accumulated sediments
  • Internal centralizer ensures the correct orientation of the filter cartridge
  • Lower pressure loss due to the special design of the filter
  • High versatility, compatible with DOE, BIG, COD3 filter cartridges.
  • Air vent valves suitable for gauge installation

Technical specifications:

  • Size: 9“ ¾
  • Connection: ¾“ or 1“
  • Tube: polyethylene terephthalate glycol (PET-G)
  • Clamping: natural brass nut CB 753 S
  • O-ring: EPDM
  • Air vent valve: brass CW 614 N
  • Maximum working pressure: 10 bar
  • Maximum working temperature: from 5 °C to 60 °C
  • Mounting: horizontal
  • Fixing: mounting hole for axle base 66x25 mm screw thread M5
  • Connection: inch screw thread

 

Dimensions (H×W×D):

  • 3/4" - 35.5 x 13.5 x 12.2 cm
  • 1" - 35.5 x 13.5 x 12.2 cm

Additional parameters

Category: Filters for mechanical impurities
According to the connection: On the water supply line
According to the type of filter: For mechanical impurities, For hot water

Be the first who will post an article to this item!

Do not fill out this field:

Security check