Rainwater tank 10,000 l RAIN SET AQ

Product detailed description

IMPORTANT: The price for shipping of this product may not be the final price. The shipping cost depends on the weight and dimensions of the delivered package. It typically ranges from about 500 to 8000 CZK. We will inform you of the shipping cost after your order is placed. Alternatively, you can inquire about the price in advance via our information line.

The plastic rainwater tank Elbi is of Italian manufacture and represents an ideal and reliable solution for the accumulation of rainwater and its use for garden irrigation. The tanks are monolithic self-supporting structures that do not require concreting; they are made from high-quality polyethylene (LHDPE) and can withstand temperatures from -70°C to +90°C. They are also suitable for locations with a high water table or rocky ground.

The rainwater tank is equipped with a submersible pump LEO LKS. This powerful garden unit has a built-in intelligent control system and operates fully automatically, so you don't need to worry about the operation. The submersible pump is permanently located in the tank and is suitable for various applications. The pump body is made of stainless steel AISI 304.

The rainwater tank 10,000 l RAIN SET AQ includes:

• self-supporting underground plastic rainwater tank Elbi with a capacity of 10,000 l
• pump LEO LKS with a power of 1,100 W and a flow rate of 5.5 m³/ hour (92 l/min)
• fully automatic system for refilling the tank and pumping water

Uses of the rainwater tank:

• for smaller and larger garden irrigation
• for the utility use of water in the household (e.g., flushing with rainwater)

Advantages of the rainwater tank:

• easy installation – no concreting required
• complete solution for rainwater
• permanent placement of the pump in the tank with fully automatic operation
• reliability and compatibility of the system
• affordability

Technical specifications of the set:

Tank

WARNING: When digging a hole in the ground for this tank, always account for dimensions of approximately +30 cm on each side.

Garden submersible pump

Use

• The pump is intended for pumping water without abrasive particles
• Pumping water from wells and tanks
• Suitable for smaller irrigation systems

Pump

• Built-in intelligent control system
• Automatic operation
• Pump body made of stainless steel AISI 304
• Max. flow Q max: 5.5 m3/ hour (92 l/min)
• Max. discharge height H max: 45 m (water pressure 4.5 bar)
• Power: 1,100 W
• Maximum liquid temperature: 35°C
• Maximum immersion depth of the pump: 12 m
• Available in a design with side suction
• Switch-on pressure 2.5 bar
• Cable length 15 m

Motor

• Copper winding
• Built-in thermal protection
• Insulation class: F
• Protection degree: IPX8

Refill assembly

• electromagnetic valve with a dimension of 1“. The valve is supplied with a cable length of 10 m, which is finished with a plug.
• float switch with a quality neoprene cable of 10 m length and ballast

The cable from the float is terminated with a Schucko plug, to which the plug from the electromagnetic valve is subsequently connected, and the whole assembly is simply plugged into a socket.