Reverse Osmosis Aquarium AQ RO 100

Product detailed description

Aquarium AQ RO 100 Reverse Osmosis - aquarium membrane water filter with state-of-the-art filtration technology - efficiency 90-95%. Filtration provides pure, non-toxic water even for the most demanding aquarium fish like discus and saltwater fish.

The filter operates solely based on the inlet water pressure and does not use any chemicals. Reverse osmosis is the best technology for water purification that humanity has invented. Filters based on this technology remove up to 90-95% of impurities in water. Each filter contains a reverse osmosis membrane that eliminates harmful substances such as nitrates, nitrites, heavy metals, sulfates, chlorine, ammonium ions, iron, manganese, and others, while allowing water and oxygen molecules to pass through very well. The system connects to the water supply (installation kit and hoses included) and is ready for installation immediately.

THREE STAGES OF THE FILTRATION SYSTEM

1. The first stage of pre-filtering removes mechanical particles larger than 20 microns, as well as chlorine and organic compounds. This stage uses a granulated activated carbon (GAC inline filter).
2. The second stage of filtration is the RO 100 GPD membrane - up to 370 l/day.
3. The third stage of filtration is for removing undesirable tastes and odors - a granulated activated carbon (GAC inline filter).

We recommend servicing the replacement of cartridges once every 12 months or after consuming 6,000 liters of water.

Technical parameters:

• system performance according to membrane: up to 370 l/day (higher performance up to 576 l/day available).
• filtration performance TDS (total dissolved solids) (NaClO): 90 to 95%
• min/max inlet operating pressure: 2.2 bar to 8 bar
• inlet water temperature: from 2°C to 40°C
• inlet water hardness: Max. 4.5 mmol/l
• inlet free chlorine: Max. 0.4 mg/l
• inlet iron: Max. 0.3 mg/l
• dimensions: 35 x 20 x 8 cm
• three-stage filtration
• complete set for connection, hoses and holder included.
• ratio of pure to waste water: 1/3 to 1/4 l

For connection, you need a water supply connection and a drain connection. During filtration, undesirable substances are captured in waste water, which self-cleans the reverse osmosis membrane and prevents clogging.

Installation and service of the device

Installation and delivery will be provided by our own service technicians across the Czech Republic and Slovakia for 1,690 CZK with VAT + travel 14 CZK/km or a flat travel fee of 990 CZK (outside Prague, Brno) / 1,490 CZK (Prague, Brno) in cases where the technician's trip is associated with other installations or services along the way. The installation price is indicative, depending on the difficulty of the installation and the material used.

Service replacements are carried out once every 10-12 months. The price for service replacement is 558 CZK + travel, which is charged flat at 590 CZK (for Prague and Brno 990 CZK) if the technician's trip is combined with other installations or services along the way. Or 14 CZK/km if it is just the technician's single visit - to be paid in cash to the technician.

Service replacement includes the work of an authorized technician, replacement of filter cartridges, disinfection, inspection, and adjustment of the filter.