Reverse Osmosis Commercial RO C1200

Product detailed description

Industrial five-stage filtration Commercial RO C1200 with two 600 GPD membranes and pre-filtration made up of a 5-micron mechanical filter, granular carbon insert, and carbon block - compressed carbon insert with a permeability of 10 microns. The Commercial RO C1200 system achieves a performance of up to 200 l/h.

Each of the two 600 GPD membranes has its own membrane pump and automatic flushing. The system is also equipped with two small pressure tanks and discharge connectors.

Filtration stages:

1. Polypropylene 20” insert to remove mechanical impurities up to 5 microns
2. 20” insert with granular carbon
3. Carbon block - 20” carbon insert 10 microns
4. first stage RO membrane 600 GPD
5. second stage RO membrane 600 GPD

RO filtration

The basis of this filtration is the RO membrane, which ensures the capture of all undesirable substances with an effectiveness of more than 95%. Larger impurities include bacteria, viruses, molecules of all chemical elements, herbicides, nitrates, and all heavy metals, as well as residual substances from pharmaceuticals (hormonal contraceptives, psychotropic substances, etc.), which are increasingly found in drinking water.

Technical parameters:

• Pressure (max. / min.): 6 bar (600 kPa) 1 bar (100 kPa)
• TDS (max.) 1500 ppm
• Temperature (max. / min.) 40ºC – 2ºC
• Hardness (max.) 15ºHF**
• Control type: High-pressure switch. Bypass solenoid valve for input control.
• Safety system: Low-pressure switch.
• Dimensions (mm): 810 x 400 x 260
• Weight (kg): 26 Kg
• Input connection: 3/8”
• Drain connection: 1/4”
• Faucet connection: 3/8”

Installation and service of the device

Installation and transportation will be provided by our own service technicians across the Czech Republic and Slovakia for 1,690 CZK including VAT + travel costs of 14 CZK/km or a flat travel fee of 990 CZK (outside Prague, Brno) / 1,490 CZK (Prague, Brno) if the technician's trip is combined with other installations or service along the way. The installation price is indicative and depends on the difficulty of the installation and the materials used.

Service replacements are performed once every 6 months depending on water consumption. The cost of a service replacement is 4,990 CZK + travel costs, which are charged at a flat rate of 590 CZK (for Prague and Brno 990 CZK) if the technician's trip is combined with other installations or service along the way. Or 14 CZK/km in case it is just the technician's trip - payment is made in cash to the technician.

The service replacement includes the work of an authorized technician, replacement of filter inserts, disinfection, inspection, and adjustment of the filter.