Soda Dispenser FC 330

Product detailed description

Dispenser FC 330 is an exclusive soda machine for the production of sparkling, chilled, room temperature, or hot water, for example, for making tea. This elegant soda machine is suitable for reception areas, offices, or other spaces where up to 15 people gather. It has a dispensing capacity of 6 l/h for chilled water and 10 l/h for hot water.

The dispenser has two outlets - one for room temperature, chilled, and sparkling water, and another for hot water. The hot water outlet is equipped with a safety lock to prevent scalding.

The elegant design and great features are additional advantages of this soda machine. The metallic casing complements the modern black front panel. The soda machine also has a energy-saving system, which turns off the heating function at night, thereby reducing electricity costs.

The advantage of the column design is that you can store all accessories in the column. Included with the dispenser is a 425g CO2 cylinder, which is sufficient for approximately 70 liters of sparkling water; however, we recommend getting a larger CO2 cylinder - 2l or 5l.

3 Stages of Filtration:

• Microcarbon pre-filter - Removes mechanical particles (e.g. sediment, rust, and sand). Carbon reduces chlorine and improves the taste and odor of water.
• Ultrafiltration - Filters impurities larger than 0.2 microns (microorganisms, bacteria, and viruses) using cellulose nanofibers.
• Carbon post-filter - Absorbs harmful substances such as chlorine and organic compounds.

Advantages:

• It is one of the few soda machines in our offer that allows the dispensing of both sparkling and hot water
• Effective filtration - removes mechanical impurities, microorganisms, bacteria, and viruses, and improves the taste and odor of water
• Cooling capacity of 6 l/h, heating capacity 10 l/h
• Separate hot water outlet with safety lock
• Representative elegant design
• Energy-saving system

TECHNICAL PARAMETERS:

• Height: 1160 mm
• Width: 300 mm
• Depth: 415 mm
• Connection: 1/4" (inlet)
• Weight: 28 kg
• Power supply: 220-240 VAC / 50HZ
• Incoming water temperature : 4 - 38ºC
• Total water tank: 12.5 l
• Cooling system
  • Cool water tank capacity: 6 l
  • Cooling capacity: 6 l/h
  • Cooling system: heat pump, direct cooling system
  • Compressor: 110 W
  • Refrigerant: R600a
  • Temperature control: temperature sensor
  • Cooling switch: on the back of the device (marked COLD)
• Heating system
  • Hot water tank capacity: 6.5 l
  • Heating capacity: 10 l/h
  • Heating power: 2000 – 2400 W
  • Temperature control: temperature sensor and safety lock 95ºC
  • Heating switch: on the back of the device (marked HOT)

• Maximum water pressure: 4 bar
  • In case of water pressure above 4 bars, it is necessary to equip the machine with a pressure reduction valve; we recommend a reducing valve with a manometer
  • In the case of water pressure above 3 bars, we recommend purchasing the Hunter pressure reducing valve 

You should know:

• The pressure reducing valve is not included with the soda machine. You need to purchase the Connection Set for Soda Machines.

CO2 Cylinder for Sparkling Water:

Included with the dispenser is also a 425 g CO2 cylinder, which is sufficient for approximately 70 liters of sparkling water. Replacement 425 g CO2 cylinders cost 790 CZK, but we recommend using a larger CO2 cylinder - 2l or 5l.

We recommend renting the pressure cylinder (then you do not have to do annual mandatory inspections, as you would if you bought the tank) from companies such as Linde, Immergas, or others that provide pressure cylinders; the annual rental costs about 400 CZK, and refilling the tank is 400 CZK. 

Installation and Service of the Device

Installation is provided by our own service technicians throughout the Czech Republic and Slovakia. The installation price starts from 1,980 CZK  + travel costs 16 CZK/km or a flat travel fee of 990 CZK (outside Prague, Brno) / 1,490 CZK (Prague, Brno) if the technician's trip is combined with other installations or services along the way (we have 16 technicians spread across all regions).  The installation price is indicative, depending on the difficulty of the installation and the installation materials used.

Service exchanges are carried out once every 6 months, depending on water consumption. The price of service exchange is 2 990 CZK + travel costs, which are charged flat at 590 CZK (for Prague and Brno 990 CZK) where the technician's trip is combined with other installations or services along the way. Or 14 CZK/km if it's just a single technician trip - paid in cash to the technician.

The service exchange includes the work of an authorized technician, replacement of filter cartridges, disinfection, inspection, and adjustment of the filter.