Soda Maker PERLA mini 1

Product detailed description

The PERLA mini 1 Soda Dispenser is one of our luxury models, suitable for representative rooms, offices, restaurants, etc. The PERLA mini 1 soda dispenser, with a capacity of 17 liters per hour, allows dispensing of 4 types of beverages - room temperature, chilled, sparkling, and lightly sparkling chilled water. Its appearance complements any modern interior.

The PERLA soda dispensers are controlled via a glass touch panel with backlit buttons – pictograms located on the glass touch panel.

Advantages

• Simple operation
• Direct connection to the water supply
• Powerful antibacterial filtration – carbon filter with silver or hard water filtration to eliminate scale formation
• Advanced and modern appearance
• Robust construction
• Stainless steel casing
• Choice of 4 types of beverages
• We provide installation and service exchanges through our service technicians throughout the Czech Republic and Slovakia

Technical Specifications

• Capacity 17 l/h
• Dimensions W/H/D (mm): 250 / 417 / 444 mm
• Weight: 23 kg
• Dispensing: unchilled, chilled, lightly sparkling, and sparkling chilled water
• Inputs: 1x CO2 (3/8" hose) + 1x water (3/8" hose)
• Water: water supply - connection to a tap with a 1/2" thread (preferably within 5m from the soda dispenser), input water must meet pressure and quality criteria
• Gas: CO2 - a 6 kg pressure bottle is sufficient for approximately 10,000 liters of sparkling water. Due to the absence of a stand, the bottle must be placed next to the device
• Electricity: standard electrical socket (within 1.5m from the soda dispenser) 220 - 240 W / 50Hz
• Cooling compressor power: 1/8 HP
• Maximum water pressure: 4 bar
  • In case of water pressure above 4 bars, it is necessary to equip the automatic with a pressure reducing valve; we recommend a reducing valve with a manometer.
  • In case of water pressure above 3 bars, it is recommended to purchase a Hunter pressure reducing valve.

The soda dispenser comes with a drip tray.

To connect the soda dispenser, the following is needed:

Description: 

You should know:

• The CO2 bottle and the reducing valve are not included with the soda dispenser. You need to purchase a Connection Kit for Soda Dispensers.

CO2 bottle for sparkling water:

• 500g, dimensions 52 cm height, 6 cm diameter, approx. 1,000 liters of sparkling water
• 2kg, dimensions 53 cm height, 10.5 cm diameter, approx. 3,000 liters of sparkling water
• 4kg, dimensions 78 cm height, 10.4 cm diameter, approx. 6,000 liters of sparkling water
• 6kg, dimensions 79 cm height, 14 cm diameter, approx. 10,000 liters of sparkling water

We recommend renting the pressure bottle (you do not need to perform the annual mandatory inspections if you buy the bottle) from Linde, Immergas, or another supplier of pressure bottles; the annual rental costs about 400 CZK and filling the bottle costs 400 CZK.

Installation and service of the device

Installation will be provided by our own service technicians throughout the Czech Republic and Slovakia. The installation price starts from 1,980 CZK  + travel costs 16 CZK/km or a flat travel fee of 990 CZK (outside Prague, Brno) / 1490 CZK (Prague, Brno) if the technician's journey is associated with additional installations or services along the way (we have 16 own technicians distributed across all regions). The installation price is indicative and depends on the complexity of the installation and the materials used.

Service exchanges are performed 1x every 6 months according to water consumption. The price for a service exchange is 2,590 CZK + travel costs, which is paid as a flat rate of 590 CZK (for Prague and Brno 990 CZK) if the technician's journey is associated with additional installations or services along the way. Or 14 CZK/km if it is a single technician visit - paid in cash to the technician.

The service exchange includes the work of an authorized technician, replacement of filter cartridges, disinfection, inspection, and adjustment of the filter.