UV lamp 6 W - Teflon

Product detailed description

The polypropylene teflon UV lamp 6 W is a new type of UV lamp with higher disinfection efficiency using UV radiation for all osmotic filters connected to their own water sources - wells, boreholes, etc. The UV lamp does not filter the water but disinfects it using UV radiation to 99.98% from all viruses and bacteria. It is necessary to install a pre-filter with a minimum of 20 microns before the UV lamp. The maximum flow rate of the UV lamp is 2 l/min.

For connecting the UV lamp, we recommend using overvoltage protection UV Protect S PO20 in the socket before the transformer. This will protect the UV lamp and the transformer from voltage surges caused by, for example, current surges or storms.

ADVANTAGES OF THE UV LAMP

The advantage of this new UV lamp is its small size and elimination of water heating, where it is not necessary to let the water run long to avoid it being warm, as is the case with traditional metal UV lamps.

TECHNICAL PARAMETERS:

Material of the casing: Polypropylene with an aluminum protective layer 
Material: Teflon 43 mm 
Maximum flow: 1 l/min ( 5 min. filtered water ), 2 l/min ( osmotic water ) 
Lifetime of the lamp: 9000 hours (1 year) 
Power of the lamp: 6 W 
Maximum pressure: 5.8 bar 
Wavelength: 254 nm (nanometers) 
Electrical connection: 230V 50/60 Hz 0.1 A EU plug  
Connector to the lamp: 4 pins on one side 
Dimensions: (A X B): 60 mm x 215 mm 

The price of a replacement UV lamp 6 W is 460,- including VAT. It is necessary to have an electrical socket nearby for connecting the UV LAMP.

Package Contents:
UV lamp 6 W teflon
UV lamp 6 W
holder for the UV Lamp
power supply
manual

Never handle the UV lamp with bare hands; always use, for example, a dry paper towel. Handling with bare hands significantly reduces the lifespan of the lamp.

The price of 1990,- including VAT does not include the installation of the device. We recommend having the installation performed by our authorized service, which we have throughout the Czech Republic. The price depends on the complexity and duration of the installation (approximately 690 CZK + travel costs).