UV lamp VIQUA Sterilight VP-950 - 95 W

Code: AQC0001329
Tip
Not rated
€1 379,20 €1 139,83 excl. VAT
In stock; available within 5 days

UV lamp VIQUA STERILIGHT VP-950 for the removal of bacteria, cysts, and viruses from water using UV radiation. Maximum water flow 7.8 m3/h, 1 1/2" external threads, power consumption 95 W.

Detailed information

Product detailed description

  •  Flow rate up to 7.8 m3/hour
  • Dimensions: length 1114 mm, diameter 89 mm
  • 1 1/2" external threads
  • Power consumption 95W 
  • Replaceable lamp: S950RL-HO
  • Max working pressure: 8.6 bar
  • Stainless steel UV lamp housing made from SS304
  • SS316 housing – on request
  • High-efficiency UV lamps
  • New intelligent power supply with visual and audible fault indication
  • Made in Canada

VIQUA UV lamps are designed to remove bacteria, cysts, and viruses from water using UV radiation. This disinfection method is applicable for family homes, cottages, laboratories, restaurants, hospitals, and also in industry.

Water enters the inlet port of the UV reactor and flows around a powerful mercury lamp located inside a thermally protected quartz tube. Ultraviolet radiation of 253.7nm kills bacteria and viruses and damages their DNA molecular structure, preventing them from reproducing. At the same time, it does not introduce any changes to the chemical content of the water and does not create by-products. Ultraviolet radiation is completely harmless, environmentally friendly, easy, inexpensive, and the most advanced method of disinfection.

Safety is paramount. Without it, there would be no sense in talking about disinfection (for example, a single colony of Escherichia Coli bacteria is sufficient to cause illness). Therefore, VIQUA UV lamps guarantee absolute certainty, derived from worldwide experience in water disinfection over the last 90 years. Sterilight UV lamps are made in Canada and have high-quality workmanship.

Individual models of UV lamps differ in maximum flow rate, i.e., the flow at which they can still ensure a water irradiation intensity of 40 mJ/cm2, according to Czech legislation.

Please note that for the proper functioning of the UV lamp, mechanical pre-filtration of the water is required. We usually use mechanical filters from our product range. We recommend the pre-filter PX 60 or PX 80.

For connecting the UV lamp, we recommend using surge protection UV Protect S PO20 to be plugged before the transformer. This protects the UV lamp and transformer from surges caused, for example, by power surges or thunderstorms.

For the proper functioning of the device, we recommend installation by our authorized service throughout the Czech Republic. The installation price depends on the complexity of the installation and the materials used.

Diagram of possible connection of VIQUA UV lamp:

UV lamp VIQUA - connection diagram
 
Requirements for incoming water:
-      Iron – max. 0.3 mg/l.
-      Manganese – max. 0.05 mg/l.
-      Water hardness – max. 2.5 mmol/l.
-      Mechanical pre-filtration is required

Never handle the UV lamp with bare hands; always use, for example, a dry paper towel. Handling with bare hands significantly reduces the lifespan of the lamp.

Additional parameters

Category: UV lamps for water
According to performance: 95 W
By type: UV lamps
Product type for water treatment: UV lamps

Be the first who will post an article to this item!

Do not fill out this field:

Security check